How To Mount Blink XT2 Camera Easily

Mounting the Blink XT2 device may be a bit difficult for certain people. But in today’s post, we’re giving you the step by step tutorial on how to mount Blink XT2 camera. Although locating a sturdy central piece to fit this surveillance camera within your home can be difficult. Installing any Blink XT2 camera is easy as it only involves screwing the base into your chosen frame. But that’s only the first half of the work. The next half is I’m giving you some tips on where to mount Blink XT2 camera properly.

How to Mount Blink XT2 Camera

1. Mounting Blink XT Cameras

It is fairly quick to install older Blink XT cameras. In the middle of the camera’s battery cover, you place the device effectively into the circular hole. This must go over the black button used to clear the cover of the plug.

Though I’ll say they seemed a little flimsy, I never had this issue myself again. Though, I discovered that the newer mounts would rust relatively quickly on the hinge region if you weren’t cautious and would cause the device to shift back and forth while you got a lot of wind or if a larger object hit it. 

Since they provide a freshly updated edition with the launch of the new Blink XT2, and it comes in a three-pack. The latest two XT cameras as they can both operate for the original indoor Blink and Blink XT system. 

2. Mounting Blink XT2 Cameras

Many of the shoppers who have the flimsy older mounts end up going for aftermarket alternatives. Blink also launched some latest factory mounts that work with or can be ordered separately from the XT2 packages. Such brackets are acrylic, and you can use a ball-type joint to clip it. 

You have several mounting points, and if you choose to move the device at a different angle, it even comes with an extra spacer. It’s simple to install, only move it into position before you hear it open. It is very easy to adjust, and you can tilt it to the viewing angle you like. It feels and looks more robust than the earlier ones, and it’s just a matter of moving it off. 

These new black mounts will work all over the blink cameras, so if you have existing cameras and are trying to look for adapters, this will be a viable solution. Only use the two provided screws and optional spacers for easy installation. When installed, switch the device on. You can see how simple it is to switch, and it stays in place without any complications. 

How to Remove a Blink XT2 Camera Mount

It only fits to know how to remove a Blink camera after you learned how to mount Blink XT2 camera. The only thing you need to do on the original Blink XT cameras is to unscrew the one screw, which keeps the camera to the floor. You may even unclip the device from the base, which stays in the wall. Similarly, it functions in the mounts of the current Blink XT phone. While not as flimsy, you can only unclip it straight from the board.

Having written thoroughly on this blog about how much I enjoy the Blink XT series of cameras, I think at this stage, they are worth the money. I have zero reservations about the first Blink cameras I purchased just over two years ago. When I began receiving concerns, I was concerned about the first mounts, but I never actually noticed any issues, and now my doubts have been put to rest for the newest mounts. 

Things to Keep in Mind When Mounting Blink XT2 Camera

You can use mount riser to extract from the mounting surface of the device. It also decreases, allowing for a broader range of motion when placing the object. If you are trying to install on a particular surface or some form of masonry, you’ll want to check your screws. 

By clicking the device, we suggest keeping the camera where you want to install and attempting a Live Shot. It helps you to check that the sensor has a clear vision and a strong signal quality in that area. The greatest motion tracking happens as a person walks the field of view straight into or away from the device. Please bear this in mind when considering a spot.

Tips to Mount Your Blink XT2 Camera

You can use the Blink XT2 camera for indoors or outdoors, which opens up multiple monitoring opportunities. Lack of camera cables and battery wires ensures that the Blink XT2 will travel everywhere.

You have a couple of items to remember with outdoor cameras when it comes to placing them. If you have one, you would have to shield the front, back, and garage windows. You might want to try to add the bolt if you have a fence to protect specific places such as the yard and the road. You may even catch the one who lets their dog pee in your yard. 

Be imaginative about where you are putting your devices. Place one camera in the dining room, kitchen next to the knife block, and the driveway next to the garbage can. Once you settle in for a final arrangement, transfer them a few times. Thieves are powerless to conceal surveillance, which they do not see.  

Places to Mount Blink Cameras

• Bookshelf with knickknacks
• Mantel or curtain
• Entertainment center
• Behind a plant or a lamp
• Kitchen counter
• Atop refrigerator or appliance
• Mounted high on a wall in a corner
• Near kids toys 
• Behind a picture

Conclusion

Related Articles